Viesta VDE6065SR Gebrauchsanleitung Seite 6

Mounting of the V-FLAP:
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body.
The images only show an example of how to mount the V-flap,the outlet may be various according to
different models and configuration.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
INSTALLATION (Wall Mounting)
1. Decide the location of the holes for fixing the cooker hood. The cooker
hood should be placed at a distance of 65~75cm above the cooking surfa-
ce for best effect.
4 pcs wall plugs
2. Drill 4 x Ø8 mm holes in the appropriate horizontal
position on a solid place on the wall by the center
distance of the hole on the back of the hood. Insert
4 pcs wall plugs in the wall, fasten 2 pcs screws
(ST4×30mm) in the lower wall plugs, leaving them
2 mm out of the wall. See pic 2.
INSTALLATION (VENT OUTSIDE)
The parts required for step 2
2 pcs screws (ST4x30mm)
[ EN ● 6 ]
Version: 3:0
KEN002DH 24.02.2021
pic 1
460
432