Heinner DCH-350RGBK Bedienungsanleitung Seite 10

www.heinner.com
INSTALLING GREASE MESH FILTERS
- To install filters for the following four steps.
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
CARBON FILTER – buy separately
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. The
installation procedure of activated carbon filter is as below.
In order to install the activated carbon filter, the aluminium filter should be detached
first. Firstly, open carefully the stainless-steel cover, then press the lock of aluminium
filter and remove it.
NOTE:

Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.

When activated carbon filter attached, the suction power will be lowered.
65W, 50Hz, 220-240V
9