Abus FUAA50200 Bedienungsanleitung Seite 24

Training
1. Set the Secvest alarm system or the wireless extension
to learning mode. See the receiver instructions for more
details.
2. Wireless variations:
Activate the tamper contact of the motion sensor to send
a tamper message to the wireless alarm system.
IR variation:
Point the LED of the motion sensor at the IR receiver of
the wireless extension (RFX). Trigger the tamper contact
on the motion sensor.
3. Make sure that the motion sensor is recognised by your
wireless alarm system / extension, then close the
housing.
24