Bluetti AC60P Bedienungsanleitung Seite 2

Warning
1. Charge the unit before first use.
2. Do not use solar panels with open circuit voltage higher than 28V. Solar input voltage range
for the unit is DC 12V~28V.
3. Charge the unit when the SoC drops below 5%. If the SoC drops to 0, power off the unit and
charge it for at least 30mins before restarting.
4. The unit is for off-grid use only. Do not connect its AC output to the grid.
5. If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the
power off. For optimum battery life, discharge and charge the unit every 3 months.
7. This product must be grounded before operation.
Connect a grounding cable (recommended 14AWG（1.5mm C/yellow-green color) to the
2 o
）/105
grounding terminal of AC60P. Fasten the grounding screw (M4*12) to fix the cable.