Information About The Appliance; Transport And Storage; Fitting And Installation - Opranic P6 Hybrid Serie Bedienungsanleitung

INFORMATION ABOUT THE
APPLIANCE
Appliance description
The P6 series is used to quickly generate
Instant heat.
Convection heating with hybrid heating
heats both the room's air via the
integrated convection technology and the
room surfaces via the integrated infrared
technology. This heats people or objects
directly.
The heating plates ensure even
distribution of heat in the room.
Appliance image
Ventilation slits
Front Side
Thermostat
No. Description
1 Front
2 Wall attachment
3 Rear
4 Removable wall bracket

TRANSPORT AND STORAGE

Note
If you store or transport the appliance
incorrectly, the appliance can be
damaged. Note the information on
transport and storage of the appliance.
Transport
Follow these instructions before every
transport:
• Remove the mains cable from the
socket by holding the plug.
Removable wall bracket
Power light
Rear Side
• Do not pull the appliance by the mains
cable.
• Allow the appliance to cool
sufficiently.
Storage
Follow these instructions before every
storage:
• Remove the mains cable from the
socket by holding the plug.
• Allow the appliance to cool sufficiently
• If the appliance is not being used,
store it under the following conditions:
• dry and protected from heat and frost
• in an upright position in a place
protected from dust and direct
sunlight
• if necessary, protected from invasive
dust by a cover
• do not place any other appliances
or items on the appliance to prevent
damage to the appliance

FITTING AND INSTALLATION

Delivery includes
• 1 x IR-heating plate
• 4 x screws
• 4 x raw plugs
• 1 x instructions
• 1 x label heating plate
• 1 x label packaging
Unpack appliance
• Open the box and take out the
appliance.
• Remove all packaging from the
appliance.
• Unwind the mains cable completely.
Check that the cable is not damaged
and do not damage it by unwinding
7