Getting Started; Cleaning And Care - Electrolux EEWA7700 Gebrauchsanweisung

ENGLISH
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B.
C. Spout
D. Lid
E. Opening lid button
F. Handle
G. Water level indicator
Picture page 3

GETTING STARTED

1
2
Place the base unit
wound into the bottom of base unit.
3
Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level
indicator, but not exceeding the Max. mark. Fill at least 0,6 L to ensure that the temperature shown on the
display is reliable. Recommended temperatures:
40-60 °C for baby mixtures
80 °C for delicate teas (green/white)
100 °C for perfect black tea
4
Close the lid and make sure it snaps in correctly. Place the kettle onto the base. The kettle beeps to indicate
that it is ready for use. The display shows the water temperature.
5
Press the START and KEEP WARM button.
automatically .
6
To heat water to selected temperature (not boiling): Press the buttons
the START and KEEP WARM button. When the selected temperature is reached, the kettle beeps 3 times and
7
To boil water and keep it warm at 90 °C: Press the START and KEEP WARM button twice. When the water boils,
the kettle beeps 3 times and keeps the water warm for 30 minutes.
8
To boil water and keep it warm at selected temperature: Press the buttons
Press the START and KEEP WARM button twice. When the selected temperature is reached, the kettle beeps
ed temperature.
9
START and KEEP WARM button again.
The left LED light on the START/KEEP WARM button indicates boiling is in progress, the right LED light indicates
KEEP WARM function is active.

CLEANING AND CARE

10
Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just
wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.
11
rust may appear on the base unit. Remove with a stainless steel cleaning agent.
12
Decalcifying
kettle thorougly with fresh water.
Enjoy your new Electrolux product!
www.electrolux.com
7500Series_WaterKettle_Electrolux_DRAFT_NEW languges.indd 6
wipe the inside and outside of the kettle with a damp cloth.
When the water has boiled or the kettle is moved from the base, it will
grab the strainer insert and lift out. Cleaning the heating plate
H. Display
I. Temperature selector down (
J. Temperature selector up (
K. START and KEEP WARM button
L Separate base and mains cable
or to select temperature. Press
or to select temperature.
)
)
-
6
2017-03-07 09:05:44