Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
Yearly
Controls System
Maintenance
Checking and Adjusting the
Traction Cable
Service Interval: After the first 2 hours—After the first
2 hours—Inspect the traction cable
and adjust it if necessary.
Yearly—Inspect the traction cable and adjust or
replace it if necessary.
If the machine does not drive in the forward or reverse
speeds or it drives when you release the traction lever,
adjust the traction cable.
With the traction lever disengaged, ensure that the
bottom of the traction-cable bracket is touching the
frame of the machine
(Figure
If the bottom of the traction-cable bracket is not
touching the frame of the machine, the left (traction)
cable is not properly adjusted.
To adjust the traction cable, do the following:
1.
Loosen the jam nut.
Maintenance Procedure
• After the first 2 hours—Inspect the traction cable and adjust it if necessary.
• Inspect the traction cable and adjust or replace it if necessary.
11).
Figure 11
2.
Loosen or tighten the turnbuckle to until the
cable is taught and the bottom of the bracket
touches the frame of the machine.
3.
Tighten the jam nut
1. Jam nut
g259431
4
(Figure
12).
Figure 12
2. Turnbuckle
g001021
Werbung
Inhaltsverzeichnis
