Superior SCP 7 Anleitung Seite 5

INSTALLATION OF PELLET DRAWER KIT IP68/49 - SCP7
- Remove the grille (B) and the upper filler
element (C) from the stove by first removing
the fastening screws (A) [Fig. 1].
- Remove the screws (D) from the drawer
supporting frame, which were simply used to
secure it during transportation [Fig. 2].
- Place the drawer kit on top of the stove,
aligning the front and screw the upper grille
(B) back onto the stove together with the
drawer frame.
The upper filler element (C) of the stove can
be disposed of [Fig. 3].
- Screw the drawer supporting frame onto the
top side of the hopper using the countersunk
screws (E) provided in the drawer kit [Fig. 4].
Fig. 1
C
B
A
Fig. 2
Fig. 3
A
Fig. 4
H07025440 / DT2000680 – 05
DT2012233-01
A
DT2033185-00
D
DT2033186-00
B
A
DT2033187-00
E
DT2033188-00
D
5