Olympus CAMEDIA C-030303ZOOM Bedienungsanleitung Seite 25

Connecting to a personal computer
Use the appropriate connector according to your computer's specifications.
For USB-equipped computers (IBM PC/AT compatible, Apple Macintosh)
Connect the provided USB cable to the USB port on your computer.
For serial port-equipped computers (IBM PC/AT compatible)
Connect the provided RS-232C PC serial cable to the serial port (COM1,
COM2, etc.) on your computer.
•To connect to the serial port on your Macintosh using the RS-232C PC
serial cable, use the optional conversion connector for Macintosh.
Using a personal computer
1. Make sure that the power of the personal computer and the camera are
OFF.
2. Connect the provided USB cable or RS-232C PC serial cable to your
computer. (See the previous page for details)
3. Remove the lens cap, and connect the cable to the camera's USB
connector or computer connector, then turn on your computer.
4. Set the Mode dial on the camera to
5. Start CAMEDIA Master on the computer.
USB port
USB connection cable
Serial port
RS-232C PC serial cable
.
Camera's
USB
connector
Camera's
Computer
connector
25