Technical Data - haacon S 2000 Plus S/L Betriebsanleitung

3. DELIVERy
1 Set of spindle support device =
1 Support with gear
1 Support without gear
1 Crank handle
1 Crank handle holder
1 Connection shaft
Model plate
without gear with gear
GB
Special design! Pay attention to the serial number plate and the drawing.

4. TEchNIcAL DATA

Hublast / set
Static test load
Lift / crank turn:
Low gear
Fast gear
Max. crank force (load 16 t)
Working temperature
Weight / set
Modifications of the design and execution reserved.
Order No. for set
Max. load
Stat. test load
Year of
manufacturer
S2000Plus S/h-24 S/h-30
t 24 24
t 50 / 35 (R) 60
mm 1 1
mm 20 10
N 230 230
° C -20 ... +50
kg 90 124 / 136 126 / 138
5. INSTALLATION
Read the operating manual before installing and commis-
sioning the support device.
Observe the accident prevention regulations issued by the professional
association relating to vehicle maintenance and the Machine Safety Law.
The spindle support device is a major safety component for uncoupled
semi-trailers.
It is subject to high loads during the coupling and uncoupling processes.
Great care and attention should therefore be given to its installation. It
may only be installed and commissioned by specially trained personnel.
The connection and bracing for the spindle support device must be of an
adequate size and secured without tension.
Mounting recommendation
5 x M16-8.8
190 Nm
M16-8.8
190 Nm
30
68
0,64
6,4
200
– 10 –
M16-8.8
190 Nm