Getting Started; Manufacturer Address - Acer PREDATOR CESTUS 330 Kurzanleitung

All manuals and user guides at all-guides.com

Getting started

1. Plug the USB cable into your PC.
2. System will automatically detect the device.
3. Lighting modes can be adjusted after installation completes.
4. You can download the software from http://go.acer.com/quartermaster
Caution
• Do not disassemble the device or operate the device under abnormal
conditions.
• Do not submerge the device in water.
• If the device RGB lights could not be lightened up, please re-plug in
the USB.
• If the device could not be functional, or there was thermal abnormal
situation, please re-plug in the USB.
• If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center
for assistance.
• For more information regarding the PREDATOR accessories, please
visit the PREDATOR website at www.acer.com/predator
Environment
Temperature:
• Operating: 0 °C to 40 °C
• Non-operating: -20 °C to 60 °C
Humidity (non-condensing):
• Operating: 10% to 85%
• Non-operating: 10% to 95%

Manufacturer address

Acer Inc.
8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan
Europe – EU Declaration of Conformity
We declare under our sole responsibility that the product
is conformity with all the essential requirements and other
provisions of the European Council Directive RoHS Directive
(2011/65/EU), EMC Directive (2014/30/EU) and the Low
Voltage Directive (2014/35/EU) issued by the Commission of
the European Community.
2