2.1.1.2
Vibration level
The frequency-weighted root mean square acceleration value to which the hand-arm system is exposed
measured according to EN ISO 5349-1 and 2:
2.1.1.3
Electromagnetic compatibility level
The machine contains electronic components subject to Electromagnetic Compatibility regulations, affected by
conducted and radiated emissions.
Emission values comply with regulatory requirements through the use of components that comply with the
Electromagnetic Compatibility Directive, suitable connections and installation in accordance with the requirements
of the component suppliers.
The machine therefore complies with the Electromagnetic Compatibility (EMC) directive
General precautions
CAUTION!
Do not use the tool indoors or in classified environments or where a potentially explosive atmosphere is
present.
Page 36
Tool combinations
1 - 2 - 6
1 - 3 - 6
1 - 4 - 6
1 - 5 - 6
1 - 2 - 7/8
1 - 3 - 7/8
1 - 4 - 7/8
1 - 5 - 7/8
1 - 5 - 9
Tool combinations
1 - 2 - 6
1 - 3 - 6
1 - 4 - 6
1 - 5 - 6
1 - 2 - 7/8
1 - 3 - 7/8
1 - 4 - 7/8
1 - 5 - 7/8
1 - 5 - 9
Sound level UNI EN 3746
LpA
76 dBA
75 dBA
73 dBA
74 dBA
75 dBA
75 dBA
73 dBA
73 dBA
83 dBA
Vibrations level ahe
q
5.76 m/s²
4.91 m/s²
6.35 m/s²
8.99 m/s²
4.50 m/s²
4.00 m/s²
7.50 m/s²
4.40 m/s²
6.48 m/s²
0310.0422 Use and maintenance manual – Instructions
Translation of the Original instructions Rev.: 00, Date 26/05/2023
LwA
85 dBA
85 dBA
84 dBA
83 dBA
84 dBA
84 dBA
82 dBA
82 dBA
106 dBA
EN ISO 5349