AKG C535EB Bedienungsanleitung Seite 13

–14 dB – attenuation of –14 dB, dynamic microphone output level,
flat, overload limit: 144 dB SPL.
Applications: recording high sound level instruments, or pre-
vention of overloading of mixer or amplifier inputs which are
adjusted for dynamic microphones.
–14 dB preattenuation of –14 dB (as above) with additional bass
rolloff filter below 500, slope: 4 dB/octave.
Applications: as above, mainly vocalist, but also instrumen-
tal recording, close-in miking in situations requiring effective
suppression of proximity effect.
The die-cast zinc alloy housing contains the preamplifier, d.c. voltage
regulator circuit, impedance converter, output transformer, and the
3-pin standard XLR connector (male).
Wiring: balanced, ungrounded.
The surface of the C 535 EB is matte black; therefore, the microphone
is highly inconspicuous which is a particular advantage in television
and stage work. Strong spotlights will not cause irritating light
reflections.
The C 535 EB is designed for external universal phantom powering
(9 ... 52 volts, according to IEC 61938) and may be fed from mixers,
tape recorders, battery, or mains operated power supply units. Current
consumption is lower than 1 mA.
Your C 535 EB carries its individual serial number and is packed in a
solid case lined with a soft foam material, complete with a "Quick
Release" stand adapter (SA 61).
13