RaidSonic Icy Box IB-1819M-C31 Bedienungsanleitung Seite 8

Installation
Important: During the drive assembly all cabling has to be disconnected from
the computer.
Manual IB-1819M-C31
1. Unscrew the screws on the heatsink
in order to gain access to the PCB.
2. Combine the circular notch of the
round M.2 holder with the semi-circular
notch of the M.2 SSD and hold it with
one finger (the thinner side upwards).
3. Insert your SSD carefully with the
connection side into the M.2 socket at
an angle of about 30° so it fits in smoo-
thly. Now you can fasten the SSD.
4. After doing so you can remove one
side of the protective foil and place the
delivered thermal pad directly on the
M.2 NVMe SSD. After that remove the
second protective foil.
5. In the last step you can reattach the
heatsink and fix it with the 6 screws.