Inserting/Changing The Battery - Bosch GLM 50-23 G Professional Originalbetriebsanleitung

Digital laser measure
Recommended USB Type-
C® cable
Rated voltage
Capacity
Number of battery cells
Permitted charging tem-
perature range
Power supply
Output voltage
Min. output current
Recommended power
E)
supply
A) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), weak background lighting and a 25 °C operating temperature; a
distance-dependent deviation of ±0.05 mm/m must additionally be factored in.
B) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), strong background lighting, 25 °C operating temperature and
large altitudes. In addition, a deviation of ±0.15 mm/m must be taken into account, depending on
the distance.
C) In continuous measurement mode, the max. operating temperature is +40 °C.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by con-
densation is expected.
E) For additional technical data, visit: https://www.bosch-professional.com/ecodesign
The serial number (11) on the type plate is used to clearly identify your measuring tool.

Inserting/Changing the Battery

Always replace all the batteries/rechargeable batteries at the same time. Only use
batteries/rechargeable batteries from the same manufacturer and which have the
same capacity.
Bosch Power Tools
GLM 50-22 GLM 50-23 G
1 600 A01 6A8
3.7 V
1.0 Ah
0 °C to +60 °C
5.0 V
500 mA
2 609 120 713 (EU)
2 609 120 718 (UK)
1 600 A01 3A0 (ARG)
1 600 A01 3A1 (MEX)
1 600 A01 3A2 (BRL)
English | 27
GLM 50-25 G
1
1 609 92A 7P5 | (24.06.2022)