Technical Data; Intended Use; Device Elements - Würth JUMP PACK PRO Bedienungsanleitung

Parameter
Nominal voltage
internal battery
Starting current
Max. current
USB OUT
Micro USB IN
Degree of protection
Operating temperature
Charge temperature
Dimensions
Weight
The device is for starting vehicles with a 12 V on-board voltage, if
the start-up capacity of the vehicle batteries is insufficient.
It can also be used for charging external devices via USB. Any
other use is considered an improper use.
The user is solely responsible for damage resulting
from improper use.
Overview [fig. I]
1
LED On/Off indicator
(white)
2 ON/OFF switch
3 LED error indicator (red)
4 Battery status indicator
5 Boost LED (white)
6 Light mode button
14

Technical data

-30 °C to +50 °C
0 °C up to +40 °C
21.8 × 15.2 × 6.4 cm

Intended use

Device elements

7 Manual override button
8 USB cable
9 USB charge adaptor for
230 V
10 USB charge adaptor for
12 V car socket
11 Jump leads
0772 070 000
12 V DC
Li-Ion
∼ 600 A
2000 A
5 V / 2.1 A
5 V / 2.1 A
IP65
2.3 kg