en operation
Tool or access-
ory
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Only attach and remove tools and
▶
accessories once the drive has
stopped and you have unplugged
the appliance.
Before changing tools or cleaning
▶
the appliance, switch off and dis-
connect it from the mains.
36
Setting
1-4
1-4
1-2
1
2-3
2-4
2-4
2-3
4
3-4
2-4
M
M
3-4
Only use the tools when the bowl
▶
is inserted, the lid is fitted and the
drive covers are in place.
Never open the swivel arm during
▶
processing.
Requirements
¡ The bowl has been inserted.
¡ The required tool is inserted.
Add the ingredients to the bowl.
1.
Press the release button and push
2.
the swivel arm down until it en-
gages.
Attach the bowl lid.
3.
→ "Attaching bowl lid", Page 35
Insert mains plug.
4.
Set the rotary switch to the re-
5.
quired speed.
→ Fig.
16
Process the ingredients until you
6.
achieve the required result.
Set the rotary switch to
7.
→ Fig.
17
Wait until the appliance stops.
Unplug the mains plug.
8.
Tips
¡ You can change the speed at any
time during processing or interrupt
processing.
¡ Clean all parts immediately after
use so that residues do not dry on.
Adding more ingredients
To add ingredients during pro-
1.
cessing, use the filling shaft in the
lid.
→ Fig.
18
To add large quantities, set the
2.
rotary switch to
Wait until the appliance stops.
Remove the bowl lid.
3.
→ "Removing bowl lid", Page 35
Add the ingredients to the bowl.
4.
Attach the bowl lid.
5.
→ "Attaching bowl lid", Page 35
.
.