7MAGIC SM-1511BM Anleitungshandbuch Seite 27

Cleaning
Body Cleaning
Accessory Cleaning
Special Cleaning
Preservation and maintenance
Disposal
Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.
1. Do not immerse the machine in the water. Do not use water to shower
directly on top of the machine to prevent the host body from entering the
water to avoid short circuits, electric shock, leakage, rust, and other failures.
2. Do not use a dripping wet towel to wipe the machine
3. Do not use detergent/vinegar/salt and other corrosive, strongly acidic,
strong alkaline cleaning products to clean the machine body, otherwise
accessible to damage the machine's surface.
4. Do not use sharp and rough tools such as wire balls to brush the
accessories. Otherwise, it is easy to damage the surface of the accessories.
1. Do not put the cast aluminum parts into the dishwasher or wash them with
corrosive, strongly acidic, or alkaline cleaning products. Please do not put
them into the dishwasher for cleaning. (Except for stainless steel parts or
surface-treated Teflon parts and electrophoresis parts)
2. Do not soak for a long time in detergent, saltwater, vinegar, and other
corrosive liquids; use in time to clean accessories.
3. After cleaning, dry the accessories, mainly to keep the internal parts dry in
time.
1. The rotating output shaft will produce a bit of black trace due to high speed
and friction when the machine is working. After each use, please clean it
promptly and keep the part dry.
2. Pay attention to the sharp blade and related sharp edge parts or
accessories.
1. You can use olive oil to apply on the blade's surface, knife plate, and
mixing pot to ensure the dry and wet environment to oxidize it.
2. When not in use, you can cover the machine with a packaging bag and
place it in a dry environment.