Function And Features - IFM Electronic Efector300 SI1002 Bedienungsanleitung

Contents
Function and features . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25
Installation and set-up / Operation / Maintenance . . . . . . . page 26
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Programming diagrams / Technical information . . . . . . . . . page 28

Function and features

The flow monitor
• detects the flow velocity in liquid and gaseous media
• switches the outputs according to the programming
(N.O./ or N.C./
• and indicates the relative flow value within the adjustable detection
range by means of LEDs:
- LED 0 = lower limit of the detection range (maximum value / LO)
- LED 9 = upper limit of the detection range (minimum value / HI)
• It is also possible to indicate:
- Switching status (LED red: flow below the switch point,
LED orange: flow has reached the switch point).
- Excess flow: LED 9 flashes if the flow is considerably higher
(2 LEDs) than the display range.
- Underflow / flow standstill: LED 0 flashes if the flow is lower than
the display range.
, programmmable by wiring; → page 24)
21