Manual Time Setting; Alarm Time Setting; Snooze Function - Bresser 8020402 Bedienungsanleitung

MANUAL TIME SETTING

1. In normal time mode, press and hold SET key for
3 seconds to enter the year setting.
2. Press or key to set the desired value.
3. Press SET key again, Month digit flashes, press
or key to change its value.
4. Repeat the above operation to set the time in
this order: Year > Month > Date > 12/24 hr mode
> Time zone (+/- 12 hours) > Hours > Minutes.
5. Press [ SET ] key to save and exit the setting
or let it exit automatically 30 seconds later
without pressing any key.

ALARM TIME SETTING

1. In normal time mode, press SET key to switch
to alarm mode.
2. In alarm mode, press and hold SET key for
approx. 3 seconds until alarm hour digit flashes.
3. Press or key to change the value.
4. Repeat the above operations to set time in this
order: Hour > Minute
5. Press SET key to save and exit the setting, or
let it exit automatically 10 seconds later without
pressing any key.

SNOOZE FUNCTION

1. If no key is pressed during the alarm period, the
alarm will turn off automatically. Alarm beeping
lasts for 2 minutes.
2. Touch the upper side of the housing (9)
[SNOOZE/LIGHT] to stop the current alarm and
enter snooze. Alarm icon AL will be flashing
continuously. The alarm will sound again in 5
minutes.
19