Before You Start - Qlima FC 156 Bedienungsanleitung

BEFORE YOU START

Contact a licensed electrician if you are uncomfortable performing electrical
work. A licensed electrician must install the fan if required by local code.
Do not use the fan with a dimmer switch. Turn off power at breaker.
Tools and Materials Required
External
hexagonal wrench
(Fig. 3)
INSTALLATION
Install Airfoils:
1.1 Moving clockwise M6x12 Screws, align each airfoil with Grommets on the fan
motor (Fig.4).
1.2 Make sure each airfoil matches the corresponding place on the fan Hub
(Fig.5).
(Fig.4)
Attach Downrod:
2.1 Assemble down rod as pictured in Fig. 6. (Please select the suitable length of
rod for your ceiling.)
NOTE: If you choose to install a safety cable/chain onto your ceiling fan, you
will need to run it through the downrod prior to installation.
Wire Phillips
stripper screwdriver
(Fig. 5)
Step ladder
GB
49