Installation Steps; Package Contents; Recommended Tools; Optional Accessories - Axis F44 Main Unit Installationsanleitung

Installation Guide
This Installation Guide provides instructions for installing AXIS F44 Main
Unit on your network. For other aspects of using the product, see the User
Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials
necessary for the installation are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 15.
4. Install the hardware. See page 19.
5. Access the product. See page 20.

Package Contents

• AXIS F44 Main Unit
• 2–pin power connector block
• 6–pin I/O connector block
• 5–pin RS232 connector block
• Installation and Management Software CD
• Printed materials
-
-
-

Recommended Tools

• Torx screwdriver T20 to remove the plastic cover bottom

Optional Accessories

• AXIS F8001 Surface Mount with Strain Relief
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
9
AXIS F44 Main Unit