Install The Hardware - Axis F44 Main Unit Installationsanleitung

RS232 Connector
5-pin terminal block for the RS232 serial interface used to control auxiliary
equipment. The port can be used in the following modes:
• 2TX/2RX RS-232 interface (TXD, RTS, GND, CTS, RXD)
Function
RS232 TD alt
RS232 RTS alt
RS232 GND
RS232 CTS alt
RS232 RD alt
SD Card Slot
The Axis product supports SD cards with up to 64 GB of storage. For best
recording performance, use ultra-high speed SD cards (SDHC UHS-I or
SDXC UHS-I).

Install the Hardware

The Axis F41/F44 Main Unit can be placed on a table desktop or mounted
on a DIN rail. To facilitate routing the cables from the top or side remove
the 4 screws (Torx T20) and suitably realign the bottom plate under the
unit (see Hardware Overview on page 10). See www.axis.com for optional
accessories.
Pin Notes
1
RS-232 Driver Output
2
3
Ground
4
RS-232 Receiver Input
5
19
AXIS F44 Main Unit