Maintenance; Specifications - Magnat CS 10 Installationsanleitung

11. reSetting the ProduCt ManuaLLy to the FaCtory SettingS
If the speaker no longer responds to inputs or if problems occur with the network connection, it may
be necessary to reset the product to the factory settings.
• Press the SET (RESET/ WPS MODE) button on the rear of the product and hold it down for more
than 5 seconds.
note: All existing network information will have been deleted and will have to be re-entered to
establish a network connection.
12. SoFtWare uPdate
You can use the app to update the software of the speaker. The app searches for software updates
and, if one is available, it downloads it from the internet onto the speaker.

MaintenanCe

The lacquered surface is best cleaned with a mild household cleaner. On no account use furniture polish
or similar products on these surfaces.
hoW to avoid daMage to your vaLuaBLe SPeaKerS
All MAGNAT loudspeakers are designed and built for optimum sound reproduction with the tone controls
in the central position – i.e. with "linear" amplifier output. Turning up the bass and treble controls too
far delivers more power to the woofers and/or tweeters, and at high volumes this can actually destroy
the speaker units!

SPeCiFiCationS

Operating voltage:
System Type:
Rated output power:
Frequency range:
Temperature range:
Net weight:
Dimensions (WxHxD):
WLAN
Frequency range:
WLand standard:
Ecryption:
Range:
SUBJECT TO TECHNICAL CHANGE
DC 12V 2A 24W (Input)
1.0 Channel
15 Watts
70 – 18 000 Hz
0 - 45° C
1,49 kg
180 x 131 x 90 mm
2.4GHz/5GHz
802.11 a/b/g/n
WPA2
circa 35 - 100 m indoor
circa 100 - 300 m outdoor
21