Wiesenfield WIE-CCD-400 Bedienungsanleitung Seite 55

2. Closing the door is
blocked
3. The door is too light
4. The position of the
cable inside the
controller is incorrect
Err 6 The door is too heavy
Check that the door is not blocked by obstacles at
the bottom of the door or in the way of its usual
movement. When these are removed, the door will
close automatically.
Use a door weighing 300-1000 g. Wait 8 seconds
after installation. The door will then perform a
functional test and return to normal operation.
Open the front panel of the controller, position the
cable manually as shown on the PCB and wait 8
seconds. The door will then perform a functional
test and return to normal operation.
Use a door weighing 300-1000 g. Wait 8 seconds
after installation. The door will then perform a
functional test and return to normal operation.