Network & Internet - Panasonic TX-43MX700E Bedienungsanleitung

Digital Output Delay: Adjust the digital output
delay value.
Auto Volume Control: With Auto Volume Control,
you can set the TV to automatically level out sudden
volume differences. Typically at the beginning of
adverts or when you are switching channels. Turn
this option on/off by pressing OK.
Downmix Mode: Set your preference to convert
multi-channel audio signals to two-channel audio
signals. Press OK to see the options and set. Stereo
and Surround options will be available. Highlight
the option you prefer and press OK to set.
DTS DRC: Dynamic Range Control provides gain
adjustment of the source to maintain suitable au-
dible range at both low and high playback levels.
Turn this option on/off by pressing OK.
Dolby Audio Processing: With Dolby Audio Pro-
cessing, you can improve the sound quality of your
TV. Press OK to see the options and set. Some other
sound options may become unavailable and appear
as greyed out depending on the settings made here.
Turn the Dolby Audio Processing feature off if you
would like to change these settings.
Dolby Audio Processing: Highlight this option
and press OK to turn this function on/off. Some
options may not be available if this option is not
turned on.
Sound Mode: If the Dolby Audio Processing
option is turned on Sound Mode option will be
available to set. Highlight the Sound Mode option
and press OK to see the preset sound modes.
Game, Movie, Music, News, Stadium, Smart
and User options will be available. Highlight the
option you prefer and press OK to set. Some
options may not be available if this option is not
set to User.
Volume Leveler: Allows you to balance the sound
levels. In this way, you are minimally affected by
abnormal sound rises and falls. Turn this feature
on/off by pressing OK.
Surround Virtualiser: Turn the surround virtua-
liser feature on or off.
Dolby Atmos: Your TV supports Dolby Atmos
technology. By means of this technology the sound
moves around you in three-dimensional space, so
you feel like you're inside the action. You will have
best experience if input audio bitstream is Atmos.
Turn this option on/off by pressing OK.
Dialogue Enhancer: This feature provides sound
postprocessing options for speech-gated dialogue
enhancement. Off, Low, Medium and High options
will be available. Set according your preference.
Note: This feature has an effect only if input audio format
is AC-4 or dolby audio processing is enabled. This effect
only applies to TV loudspeaker output.
Dolby Atmos Notification: Set your notification
appearance preference for Dolby Atmos content.
When turned on, Dolby Atmos logo will be displa-
yed on the screen when Dolby Atmos content is
detected.
DTS Virtual:X: This feature will enhance your sound
experience by providing a virtualisation of surround
speakers through your TV's speakers. Highlight
Virtual:X and press OK. The TruBass option will
become available. TruBass manages and enhances
low frequency signals. Highlight this option and
press OK to turn it on or off. Some other options may
become unavailable and appear as greyed out de-
pending on the setting made here. This item will not
be available if Dolby Audio Processing is turned on.
Reset to Default: Resets the sound settings to
factory defaults.
Audio Output
Digital Output: Set the digital sound output prefe-
rence. Auto, Bypass, PCM, Dolby Digital Plus and
Dolby Digital options will be available. Highlight the
option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output
delay value.
Network & Internet
You can configure your TV's network settings using
the options of this menu.
Wi-Fi: Turn the wireless LAN (WLAN) function on
and off.
Available networks
When the WLAN function is turned on, available
wireless networks will be listed. Highlight See all and
press OK to see all networks. Select one and press OK
to connect. You may be asked to enter a password to
connect to the selected network, in case the network
is password protected. Additionally you can add new
networks by using the related options.
Other options
Add new network: Add networks with hidden SSID's.
Data Saver: Turn the Data Saver function on and off.
This function automatically adjusts video quality to
use less mobile data. When turned on, Data Saver
will monitor and limit your network traffic.
Data usage and alerts: Set alerts to monitor data
usage on your TV. You can also see the amount of
data used on the current day. Highlight Data alerts
and press OK to see available options. You can disable
alerts by setting to Off.
Scanning always available: You can let the location
service and other apps scan for networks, even when
WLAN function is turned off. Press OK to turn it on
and off.
English - 22 -