Settings; Channels & Inputs - Panasonic TX-43MX700E Bedienungsanleitung

Digital Teletext Language: Set the teletext
language for digital broadcasts.
Decoding Page Language: Set the decoding
page language for teletext display.
Blue Mute: Turn this function on/off according to
your preference. When turned on, blue background
will be displayed on the screen when no signal is
available.
No Signal Auto Power Off: Set the behaviour of
the TV, when no signal is detected from the currently
set input source. Define a time after which you want
your TV to turn itself off or set as Off to disable.
Default Channel: Set your default startup channel
preference. When the Select Mode is set as User
Select, the Show Channels option will become
available. Highlight and press OK to see channel
list. Highlight a channel and press OK to make a
selection. Selected channel will be displayed, every
time the TV is turned back on from any standby
mode. If the Select Mode is set as Last Status, the
last watched channel will be displayed.
HBBTV Settings
HBBTV Support: Turn the HBBTV function on
or off.
Do Not Track: Set your preference regarding the
tracking behaviour for HBBTV services.
Cookie Settings: Set your cookie setting
preference for HBBTV services.
Persistent Storage: Turn the Persistent Storage
function on or off. If turned on, cookies will be
stored with an expiry date in the persistent
memory of the TV.
Block Tracking Sites: Turn the Block Tracking
Sites function on or off.
Device ID: Turn the Device ID function on or off.
Reset Device ID: Reset the device ID for HBBTV
services. Confi̇ rmati̇ on dialogue will be displayed.
Press OK to proceed, Back to cancel.
BISS Key: "Click To Add Biss Key" message
will be displayed. Press OK to add a biss key.
Frequency, Symbol Rate (KSym/s), Polarisation,
Programme ID and CW Key parameters will be
available to be set. Once you are done with the
settings highlight Save Key and press OK to save
and add the biss key. This option will not be available
if the input source is not set as Satellite. Available
options will differ depending on the selected country
during the initial setup process.
System Information: Display detailed system
information on the current channel such as Signal
Level, Signal Quality, Frequency, etc.
Open Source Licences: Display Open Source
Software licence information.

Settings

You can access the Settings menu from the Dashboard
or from the TV options menu in Live TV mode. To
display the Dashboard, press the Settings button or
press and hold the Home button on the remote or press
the Right directional button consecutively on the Home
Screen. If Basic TV installation is performed during
the initial setup, highlight the Dashboard item on the
Home Screen and press OK.
You can use the Right and Left directional buttons,
OK, and Back/Return buttons to navigate through
the menu tree.
Channels & Inputs
The content of this menu may change depending on
the selected input source and whether the channel
installation is completed.
Channels
Analogue
Channel Scan: Start a scan for analogue channels.
You can press OK or the Back/Return button to
cancel the scan. Then press OK or the Back/Return
button again to exit. The channels that have already
been found will be stored in the channel list.
Update Scan: Search for updates. Previously
added channels will not be deleted, but any newly
found channels will be stored in the channel list.
You can press OK or the Back/Return button to
cancel the scan. Then press OK or the Back/Return
button again to exit.
Analogue Manual Scan: Start a channel scan
manually. First, enter the start frequency for the
scan. Then select the scanning direction and press
OK or the Right directional button to start scan. The
found channels will be stored in the channel list. You
can press the Back/Return button to cancel the
scan. Then press the Back/Return button again or
highlight Finish and press OK to exit.
Antenna
Channel Scan: Start a scan for digital terrestrial
channels. You can press OK or the Back/Return
button to cancel the scan. Then press OK or the
Back/Return button again to exit. The channels
that have already been found will be stored in the
channel list.
Update Scan: Search for updates. Previously
added channels will not be deleted, but any newly
found channels will be stored in the channel list.
You can press OK or the Back/Return button to
cancel the scan. Then press OK or the Back/Return
button again to exit.
Single RF Scan: Set the RF Channel option by
using the Right/Left directional buttons. Signal
English - 18 -