Hilti SID 2-A Bedienungsanleitung Seite 28

All manuals and user guides at all-guides.com
7 Transport and storage of cordless tools
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Transport the tool and batteries individually packaged.
▶ Never transport batteries in bulk form (loose, unprotected).
▶ Check the tool and batteries for damage before use after long periods of
transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the tool and batteries in a place that is as cool and dry as possible.
▶ Never store batteries in direct sunlight, on heating units or behind a
window pane.
▶ Store the tool and batteries in a place where they cannot be accessed by
children or unauthorized persons.
▶ Check the tool and batteries for damage before use after long periods of
storage.
8 Troubleshooting
8.1 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
Trouble or fault
The power tool does
not work.
The control switch
cannot be pressed,
or is stuck.
Running speed sud-
denly drops consid-
erably.
The battery runs
down more quickly
than usual.
22 English
Printed: 15.03.2019 | Doc-Nr: PUB / 5206085 / 000 / 02
Possible cause
The battery is not fully
inserted.
The forward/reverse
selector switch is in the
middle position.
Low battery.
Very low ambient tem-
perature.
Action to be taken
▶ Push the battery in
until it engages with
an audible click.
▶ Push the
forward/reverse
switch to the left or
right.
▶ Change the battery
and charge the empty
battery.
▶ Allow the battery to
warm up slowly to
room temperature.
2081236
*2081236*