How To Use - insta360 X3 Dive Case Gebrauchsanleitung

performance. While using Insta360 X3 in the Dive Case, the maximum height from
which you can dive into water is 2 meters (6.56ft). The Dive Case is protected against
drops onto solid ground from a maximum height of 1 meter (3.28ft).
⑥ Glue may be visible inside the outer edge of the Dive Case lenses. This is normal
and will not affect waterproofing performance.

How to Use

❶ Open the Case
Lift the buckle as shown below ( ① ), then pull it down to remove from the hook ( ② ).
Repeat with the other buckle. When both sides are disengaged, open the Dive Case.
❷ Attach the Anti-Fog Insert
Ensure that anti-fog insert is inserted as shown below.
Note:
When using third-party anti-fog inserts, ensure that the size is within 48.4 ×12.4
×1.2 mm. If the insert is too large, it will cause water leakage and potentially damage
the camera.
2
②
①