Safety; Correct Use; Safety Instructions; Appliance Description - STIEBEL ELTRON SBP 400 EW Bedienung Und Installation

operation

safety

2. Safety
2.1

correct use

This appliance is only intended to be used for the storage and
heating of heating water.
Any other or additional use is inappropriate, in particular
usage with alternative storage media. Correct use also includes
observation of the operating and installation instructions. Only
use the appliance for the purpose stated by us and never change
or convert it in any way.
2.2

Safety instructions

Observe the following safety information and instructions.
Installation and commissioning must only be carried out by a
qualified heating contractor.
The heating contractor is responsible for adherence to all currently
applicable regulations during installation and commissioning.
Operate this appliance only if it is fully installed and all safety
equipment is fitted.
Risk of injury
When cleaning the appliance, never use unsuitable
means of access (e.g. stools, chairs, tables). Risk of
a fall.
3.

Appliance description

3.1

properties

3.1.1 General
This appliance is designed to extend the operating time of the heat
source and to bridge power-OFF periods. It also enables hydraulic
separation of the volume flow of heat source and heating circuit.
To boost the heating water electrically, the installation of a BGC
electric immersion heater is possible.
www.stiebel-eltron.com sBp e | sBp e sol | sBp e cool | 9