Installing The Batteries; Keys & Functions - Philips SBCRU130/00U Bedienungsanleitung

All manuals and user guides at all-guides.com
XP SBC RU 130 16-06-2000 10:19
Instructions for use
You just made a great choice by buying this Philips universal
remote control! It can operate the most-used functions of
almost any brand of TV, VCR or Satellite receiver.

Installing the batteries

Your SBC RU130 needs two 1.5V batteries, type R03, UM4 or
AAA.
Put them in like this:
T i p
• Remember to replace the batteries at least once a year.
• Don't leave the batteries out for longer than one hour,
otherwise you will need to set-up the SBC RU130 again.
KEYS & FUNCTIONS
Power: to switch TV/VCR/SAT on and off.
Mute: to switch the TV sound on and off.
PROG
+ Channel Up/Down: to select next / previous channel.
-
PROG
VOL
VOL
Volume Up/Down: to control the TV volume.
-
+
N
O T E
- The channel and volume buttons have a double function! In
case you have to program the SBC RU130 for use with your
device you have to enter a 6-digit code (e.g. 012313).
These are the digits that these buttons represent:
= digit 0,
PROG
-
Mode / Shift key
MODE
MODE function (when mode key is only pressed once):
SHIFT function (when mode key is pressed simultaneously
MODE + PROG+: increases colour
MODE + PROG-: decreases colour
MODE + Volume+: increases brightness
MODE + Volume-: decreases brightness
N
O T E
- Not all brands have this shifted functionality so it could be
possible that this feature does not work on your equipment.
2
Pagina 2
DISPOSE OF USED BATTERIES
PROPERLY
= digit 1, = digit 2,
VOL
+
-
PROG
to select TV, VCR or Satellite mode.
with other function keys): to get access to
additional functions.
= digit 3.
VOL
+