Intellinet Network Solutions 561167-V3 Bedienungsanleitung Seite 3

Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation.
LED
PWR
SYS
Link/Act/Speed
10/100M: Orange;
1–8
PoE
1–8
9 – 10
(SFPs)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address
field. The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Color Status
Green
Blinking
Green
Blinking
1000M: Green
Orange
Blinking
Green Blinking
On
Off
Off
On
Off
On The connected powered device (PD) is receiving power.
Off
On
Off
Description
Unit is receiving power.
Check connection.
System is normal.
System not started.
Valid port connection.
Data transmitted/received.
No link established.
Abnormal power supply.
No PD device is linked.
Valid port connection.
Data transmitted/received.
No link established.
Instructions
3
English