Kress KUA24 Bedienungsanleitung Seite 14

not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration and noise exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and
keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration
and noise accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
TECHNICAL DATA
Battery pack(KPB1202)
14
Charger(KCH1202)
We recommend that you purchase your accessories listed in
EN
the above list from the same store that sold you the tool. Refer
to the accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATION GUIDELINES
Note: Please read the instructions carefully before use.
Usage
This tool is used to turn screws or drill holes in wood, metal
and plastics.
INSTALLATION AND OPERATION
BEFORE OPERATION
Disassemble battery pack
Battery pack charging
Installation of battery pack
INSTALLATION
CHUCK ADJUSTMENT
Warning: When replacing acces-
sories, make sure that the power
KUA24
supply is cut off and the switch is turned
2
off (the reversing lever is in the middle
position). When starting the tool, make
1
sure that there is no hidden danger to
the drill bit. Damage or loosening of the
chuck may cause personal injury.
Drill bit disassembly
Installation of drill bit
OPERATION
Forward and reverse switching
Warning: The direction of rota-
tion can not be changed until the
machine is completely stationary.
SPEED SHIFT
TORSION ADJUSTMENT
Drill, screwdriver
STEPS Pictures
See Figure A1
See Figure A2
See Figure A3
See Figure B1
See Figure B2
See Figures
C1, C2, C3
See Figure D
See Figure E