Peiying PY0011 Bedienungsanleitung Seite 16

Owner's manual
2. Directly connect the car charger to the USB port of the DVR,
then the device will automatically turn on and charge the battery.
In charging, the charge indicator will be on; after charge is over, it
will be off.
3. To charge the device with USB, be sure to connect one end of
the USB data cable to PC and the other end to the DVR. In char-
ging, the charge indicator will be on; after charge is over, it will be
off.
Installation and Removal of TF Card
1. In the direction as indicated, insert the TF card into the slot until
it is held firmly.
2. To take the TF card out, slightly press the TF card to eject it out.
Note:
1. Observe the direction to insert the TF card; if the direction is re-
verse, the device and the TF card may be damaged.
2. When the TF card is inserted into the device, the machine will
set the TF card as preset storage unit and the data in the original
TF card will be unreadable.
3. If the TF card is incompatible with the device, please insert the
card again or replace it for retry.
4. Max. 32G supported.
DVR On/Off
1. Press the On/Off key around 1s to switch on the device and 3s
EN
to switch it off.
2. Insert the device into the car charger to automatically switch on
and turn off the card charger to automatically switch it off.
16