How To Use; Main Screen - clage DEX 12 Next Gebrauchs- Und Montageanleitung

DEX 12 Next

3. How to use

EN

Main screen

The e-paper display changes automatically to main screen approx. 60 seconds after
activation or operation.
Tab the sensor keys to select user profiles or applications or change the temperature.
Status display, top
User
Menu button
Temperature display
The scale ring fills up as the temperature setting is increased. In addition, the target
temperature is displayed in °C in the middle of the display.
Temperature setting
The desired temperature can be selected via the two middle sensor keys within a range
of 20 °C to 60 °C. Tapping once changes the temperature by 1 °C, in the comfort range
between 35 and 43 °C by 0.5 °C. If the temperature is set below 20 °C, the symbol
appears in the temperature display and the appliance switches off the heating function.
User selection
Up to four user profiles can be created. Every user has the option to save his desired
temperatures for the different application in his profile. The user profiles can be select-
ed by tapping on the left sensor key and than tap the key under the profile picture (to
adapt profile, see Section "User").
Applications
Preset applications can be selected here. Simply tap on the right sensor key to open the
selection. Tap on the sensor key under an application symbol to activate it.
The temperatures are set at the factory to the following values:
shower = 38 °C, bath tub = 40 °C,
To change the values select an application and set the new temperature. Than press and
hold the sensor key under your profile picture or the application for two seconds.
Status display, top
Control lock active (PIN)
The inlet temperature exceeds the target value (appliance does not heat up)
Optional remote control or Home Server is installed. The appliance can be
controlled remotely
Status display, bottom
Display area for functions which require confirmation from the user or which are of
great significance.
Maintenance: The appliance detected an error. Select "Info" in the Main menu
to get further informations.
24
Temperature display
hot water = 48 °C
Status display, bottom
Applications
Sensor keys
hand wash = 35 °C,