Connection With The Mains - Cameo CLSCAN25W Bedienungsanleitung

ADDRESSING:
Each projector occupies 7 channels. To ensure that the control signals are properly directed to each projector, the
projector requires addressing. This is to be done for every single projector by changing the LED display as set out
in this table.
The starting address is defined as the first channel from which the DMX LED SCANNER 25W will respond to the
controller.
Please make sure that you don't have any overlapping channels in order to control each DMX LED SCANNER cor-
rectly and independently from any other fixture on the DMX data link. If two, three or more DMX LED SCANNERs
are addressed similarly, they will work similarly.

CONNECTION WITH THE MAINS

Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable PIN International
Brown Live L
Blue Neutral N
Yellow/Green Earth
10