Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION NOTES
The first step of installing a speaker system is thorough planning. Choose a suitable location for your speak-
er components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and your ears.
Pay also attention to the position of the seats, headrests and other constructional systems in the interior
space of the car.
2. Try to mount the speakers on the same arrangement. They should be installed at the same height and
directly across from each other. Do not mount one speaker higher, lower, further forward or further back-
ward from the opposite speaker.
3. When installing, make sure that the distance between the tweeter, midrange speaker (if present) and the
midwoofer is as small as possible.
4. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for
the rear of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
5. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speak-
er deck. There should be no gaps between the speaker basket and the mounting surface
6. Please handle the components with care, otherwise they will get damaged.
7. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8. Never connect the speakers to the electrical ground or with the body of the vehicle.
Tweeter
L
In-Line Crossover
(must be used)
IMPORTANT: Please pay attention to the correct polarity (+ or -) for all connections.
Midwoofer
L
+ L –
+ R –
Speaker Outputs
at the Amplifier
Midwoofer
R
In-Line Crossover
(must be used)
ENGLISH
Tweeter
R
Werbung
