Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.
RISK OF ELECTRICAL SHOCK!
1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Remove the big pieces of ice first.
5. Afterwards remove the small pieces of ice.
6. Wipe and dry the appliance and door seals with dry and soft cloths.
7. After cleaning leave the door open for some time to ventilate the appliance.
5.2 Replacing of the illuminant
WARNING! The LED-illuminant
person only. If the LED-illuminant is damaged, please contact a qualified
professional.
6. Trouble shooting
POSSIBLE CAUSE
T
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
Depending on model
21
21
MALFUNCTION
HE APPLIANCE DOES NOT WORK AT ALL
must be replaced by a competent
MEASURE
.
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model
plate with the data of your energy
supplier.
84
Werbung
Inhaltsverzeichnis
