How To Start Cooking; How To Stop Cooking - GERATEK Livorno IK6014FR Bedienungsanleitung

3.4 How to start cooking

1. Touch the ON/OFF sensor. When the power is on, a
beep sounds once; the display indicates - or --. The
appliance is in stand-by mode now..
2. Place a cookware on the desired cooking zone. Always
keep the bottom of the cookware and the cooking zone
clean and dry.
3. Select the power level by touching the
COOKING ZONE
4. Adjust the power level using the +/- sensors (a), or slide (b), or touch a point
on the line (c).
The display indicates
 You have not placed the cookware on the correct zone, or
 You use unsuitable cookware, or
 You use cookware which is too small or not centred on the cooking zone
properly.
 While using unsuitable cookware, the cooking zone does not heat up. The
display goes off after 1 minute automatically even if you have not placed
suitable cookware on the cooking zone.

3.5 How to stop cooking

1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
sensor. The indicator flashes.
↔ indicator of the power level alternately.
SELECTION OF
-sensor of the
44