Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions; Technical Data; Charging Procedure - Carson LiPo Compact 3A Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

This charger has been specially developed for 2-, 3- and 4-cell LiPo batteries. The integrated balancer
protects your battery packs and ensures a longer service life of the cells. The charger charges your
LiPo batteries with up to 3a.

SaFeTy PrecauTionS

Please note the following safety instructions. Failure to do so may
result in serious damage to the charger and batteries.
• Do not store the charger at temperatures below 5°C or over
50°C.
• Keep the charger away from dust, moisture, rain, heat, direct
sunlight and vibrations. Do not drop.
• Only use this charger on heat-resistant, non-flammable,
non-conductive surfaces. Never place it on carpets, car seats or
similar surfaces.
• Only charge power packs indicated in the instructions.
• Do not use a voltage or charge higher than that stipulated by
the manufacturer of the battery pack.
• Check carefully that the charger is set to the correct battery type
(e.g. LiPo, NiMh ) and the applicable technical specifications (e.g.
number of cells, voltage).

TecHnicaL DaTa

500606068 3A charger:
input voltage: 110-240 VAC
Type of battery: LiPo
number of cells: 2, 3 oder 4 Zellen
Maximum charging current: 3A
Weight: 175g

cHarGinG ProceDure

1. Connect the charging unit to the mains cable supplied.
2. Connect this cable to a standard 100-240 V socket outlet. If
all the LEDs flash alternately for 1 second, the charging unit is
ready for use.
3. Now connect the battery to the charging unit via the XHP balan-
cer connector.
4. Charging will now start.
5. The charging unit has a charging control display, which is
indicated by 4 LEDs: 1st LED – battery has 25% capacity, 2nd LED
– 50% capacity, 3rd LED – 75% capacity, 4th LED – battery is fully
charged.
GB // 6
• A lithium polymer (LiPo) battery pack should be put in a LiPo
charging bag or on a fire-resistant surface during charging.
• If your battery shows evidence of any abnormalities during the
charging process (overheating, hissing, swelling), remove the
battery from the charger immediately and place it away from
people and flammable materials.
• Never take the charger apart nor make any modifications to it.
• Never attempt to use the charger to charge or discharge
non-rechargeable batteries or damaged battery packs.
• Keep the charger away from children.
• Never leave the charger unattended when connected to the
power supply.
Expert Charger
LiPo Compact
Mains cable
Error display:
All 4 LEDs flash during the charging procedure. (Please check your
battery.)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis