Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.3 Safety Instructions
Explanation of WARNING Symbols
Dangerous voltage: the lightning symbol with an arrow at the end, placed within a
triangle, indicates non-insulated, dangerous voltage within the product, which may
cause electric shock.
Note: an exclamation point inside a triangle indicates important operating and servicing
!
information for your device.
Safety instructions [
1)
Read these instructions carefully and keep this information in a safe place.
2)
Follow all warnings and instructions.
3)
Do not use the device near water or moisture.
4)
Heed all cleaning instructions. Do not block any ventilation openings.
5)
Keep the device free from moisture, excessive dust and heat sources
such as heating elements, heat storage tanks, ovens or other heat-generating
devices (including amplifiers).
6)
Do not remove the back cover. There are no parts within the device that require
adjustment by the user.
7)
Suitable cabling should only be attached by an electrician.
8)
Pay heed to the labeling of the connectors for a correct wiring.
9)
Only use cables, connectors, attachments and accessories that are part of the
delivery or specified by the manufacturer. Provided power supplies are only suitable
for commissioning and not for continuous use!
10) Only use built-in boxes specified by the manufacturer, or sold with the device.
11) Disconnect the device from the mains when a thunderstorm is expected or if the
device will not be used for a longer period of time.
12) All repairs should be carried out by trained service personnel only. Servicing may
be required if the device has been damaged in any way, such as power supply cord
or plug damage, liquid has been spilled or objects have fallen into the device, the
device has been exposed to rain or moisture, does not operate normally, or has
been dropped.
13) Do not allow any liquids to touch the device, including droplets or sprays. Do not
place any objects with liquid on the device.
14) This manual contains corresponding warnings of electric shock.The device must be
mounted on the wall in accordance with the manufacturer's instructions.
15) Wall or ceiling assembly: When mounting the product on a wall or ceiling, be sure to
install the product according to the method recommended by the manufacturer. Only
use the mounting hardware recommended by the manufacturer. This is an important
safety information.
16) An easily accessible disconnector must exist outside of the equipment for this device.
Examples of disconnectors are two-pole switches or circuit breakers.
17) An overcurrent protection device with < 4 A must exist outside of the equipment for
this device. The apparent power of the current source must not exceed 250 VA.
18) Never open the device while it is connected to the mains!
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Giessen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
According to protection class,
1)
2)
building automation systems only]
2)
1)
1)
2)
Page 9 of 38
Werbung
Inhaltsverzeichnis
