Guarantee Regulations; Recognising And Repairing Of Mistakes; Possible Cause; Notes On Product Liability - profi-pumpe SCREW-STAR 370-4 Bedienungsanleitung

4 English

7. GUARANTEE REGULATIONS

For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement
or repair of the pump. Shipping costs shall be borne by our company, except as required by law. Please report the
warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with
case-related. Returns please sufficient postage. Unfortunately not prepaid returns can not be accepted because they
are filtered out before delivery. Our service we provide in Germany.
The warranty does not cover:
l Improper installation (self-installation, unauthorized persons)
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustified interventions or changes in the pump
l Damages by selffault
l Improper servicing and improper use
l DRY RUNNIG (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!

8. RECOGNISING AND REPAIRING OF MISTAKES

Problem
Pump runs, no water is being
pumped
Pump does not start or switches
itself off
Pump runs, Pump capacity slows
down or stops
When you turn on the pump the
FI switch triggered

9. NOTES ON PRODUCT LIABILITY

We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no
changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if original
spare parts and accessories were used.

10. NOTES ON DISPOSAL

Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to
be disposed in your household garbage. We are registered at the German registration department EAR
under the WEEE-No. DE79535656. This symbol means, that you're not allowed to treat this product as
a regular household waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth. THANK YOU FOR YOUR SUPPORT!

11. EU DECLARATION OF CONFORMITY

The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the products named overleaf,
namely SCREW-Star 370-4, SCREW-Star 550-4, SCREW-Star 750-4, SCREW-STAR 1100-4, BRUNNEN-Star 750-4
placed on the market, comply with the relevant provisions listed below, the relevant EU harmonised directives and the
EU standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The
sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents:
Amur S.à r.l. - 36, Rue de la Gare - L-5540 Remich
Low Voltage Directive (2014/35/EU)
EC Electromagnetic compatibility directive (2014/30/EU)
EN ISO 12100:2010; EN 809:1998+A1:2009+AC:2010; EN 60204-1:2018; EN 60335-1:2012+A11:2014+A13:2017+A
1:2019+A14:2019+A2:2019; EN 60335-2-41:2003+A1:2004+A2:2010; EN 62233:2008+AC:2008;
EN 55014-1:2017+A11:2020; EN 55014-2:2015; EN IEC 61000-3-2:2019; EN 61000-3-3:2013+A1:2019;
RoHS: 2011/65/EU
Signed for and on behalf of:

Possible cause

Air in the system (cannot escape)
Impeller wheel is blocked
Engine guard has switched the pump off
No electricity
Pump is inserted to deep
Hose connections systems have a leak
Impeller wheel is worn down
Filter has become dirty
Pump leaks
Condensation in the electrical connection /
terminal box
Amur S.à r.l.
Remich, 02.01.2023
i.V. Dipl. Phys. Peter Neumüller
Technical Manager
Solution
Air in the system must be let out
Impeller wheel must be cleaned
Pump needs to be cooled
Check electrical connections
Insert pump not so deep
Check hose connection systems
Change impeller wheel
Clean filter
examine pump moisture damage
Disconnect from mains plug /
Information to supplier
as