Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL PASSPORT
Built-in gas hob
6. SUGGESTED
SOLUTIONS FOR
PROBLEMS
Product does not operate.
 The product is not plugged (earthed)
to the socket. Make sure the equipment is
plugged.
 The fuse is burn or broken. Check
the fuse in the fuse box. If the fuse is burnt,
activate it again.
The product ignites, but does not burn.
 Gas is over.
 Cylinder valve or natural gas valve is
closed.
 In case of houses with natural gas
supply, if there is gas leakage detector, the
leak may be detected and gas cut off.
Please note!
The following shall not be considered as defects of the Product
Changes in the structure of the coating of cast iron cooking grids,
due to improper care of the product
Changes in the structure of the coating of flame tamers and
reflectors of gas burners
Gas
Changes in flame color when using the product, which is related
cooktops
to the quality of incoming gas
Whistling and other inappropriate sounds related to the pressure
of gas incoming from the gas distribution line
Discoloration of desktop surface at the base of the burner
38
 Injector is clogged.
Flame burns low.
 Cylinder is over.
 Injector is clogged.
When the product heats and cools down,
metallic sounds are heart.
 Metal parts expand when heated and
cause sound. This is not a cause of failure.
If you cannot eliminate the problem
although you performed the instructions
given in this section, call your service to get
support. Never attempt to repair the product
that does not operate.
ENGLISH
Werbung
Inhaltsverzeichnis
