TECHNICAL PASSPORT
Built-in gas hob
4. USE OF THE RANGE
4.1 First use
Start to use the equipment after removal
of the protective film on Inox surface.
4.2 First cleaning
 Some detergents or cleaning agents
may give harm to the surface.
 Remove all packaging materials.
 Wipe the product surface with a
damp cloth or sponge and wipe dry with a
dry cloth.
Container size and gas flame should match with each other.
Gas flame should be set in such a way that it should not spread out from the container base.
Put the container as centered on the pot bearer.
36
Screenprints on
the control panel
show position of the
respective button.
4.3 Description of use of the
gas range:
1. Push and turn anticlockwise the gas
range button for setting high flame.
2. Turn on the lighter depending on the
characteristics of your range.
3. Set to the desirged flame position.
4. When the desired cooking operation is
over, bring the range button to the top point
by turning it clockwise to turn off the burner.
Cuts off the gas flow
High flame
Low flame
ENGLISH