Olympia MC 408.2 Bedienungsanleitung Seite 19

Overheating Protection
In the event of overheating or overloading, the motor switches off automatically
and the AUTO button lights up red. Allow the motor to cool down for approx.
9 minutes before resuming operation.
The device is equipped with an active ventilation system. Do not discon­
nect the device from the power supply during the cool down phase.
After cooling down, the full performance of the device is available again.
Pay attention to the permissible operating cycle (refer to Technical Data).
Appendix
Regular Maintenance and Service
Switch the device off and disconnect the power plug from the power socket
prior to cleaning it.
Clean any dust from the device with a clean, soft brush or a soft, lint-free cloth.
Do not use any solvents or cleaning agents.
Oil the shredder's cutting mechanism at regular intervals (refer to Lubricating
the Cutting Mechanism).
Technical Data
MC 408.2
Cutting capacity
Cutting method
Security level
Cutting speed
Operating cycle
Noise level
Dimensions (L x W x H)
Weight
Waste bin
Range of operations
Power supply
Power consumption
Paper Shredder MC 408.2 / 510.2 / 615.2
Max. 8 sheets of A4 (80 g/m2)
Particle-cut (micro-cut) 2 x 15 mm
P-5
1.8 m/min.
Approx. 30 min. continuous operation,
9 min. cool down phase
Approx. 65 dB
348 x 250 x 502 mm
7 kg
Approx. 16 litres
Automatic start/stop, reverse/forward running
220 - 240 V, 50 Hz, 1.2 A
max. 260 W
Gi
Appendix
19