Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.3 Remux NET:
Network ID:
Name:
NIT Version:
LCN type:
NIT Routing:
EIT Routing:
SID Offset:
ONID:
TSID:
EIT/EPG:
36
The Network ID which will be used for this transmodulator.
Insertion of the network name.
The NIT Version should be increased (+1) after each parameter change. If this feature is
supported by the TV set, a new service scan can be activated automatically. Possible value:
1...31.
Selection between EACEM, Nordiq and ITC.
Activate or deactivate the NIT playout. At a parallel use of headends from different
manufacturers, a deactivation could be required to ensure that all services are found during
the TV scan.
Activate or deactivate the EIT processing. The modification of the EIT could cause the
problem of an endless scan process. If this problem occurs at the TV devices, it is
recommended to disable the EIT routing. Afterwards there will be no EPG information
available.
Only for Hotel Mode: When using several OM headends, a service ID offset is necessary. This
is to avoid a double allocation of the static service IDs at the output. The offset has to be
greater than the maximum number of services in the output channel.
Allocating the Original Network ID (Identifier of the provider).
Transport Stream ID (Requires a unique number for each channel).
Select from which tuner the EPG information should be supplied. If there are services from
different transponders in one output channel, this functionality enables you to choose
available services with EPG information.
Werbung
Inhaltsverzeichnis
