Wisi OM 11 0648 Betriebsanleitung Seite 32

10.2 Input settings:
Adjustment for reception tuners 1-2 and 3-6:
Selection of the switching matrix:
Input A+C: The connected signal of input A will be distributed to tuner 1...2. The connected signal of input C will be
distributed to tuner 3...6. Therefore is the parallel insertion of a terrestrial and cable TV signal possible.
The selected signal modulation of tuner 1 is automatically used for tuner 2. The selected signal modulation of tuner 3
is automatically used all following tuners, this makes the installation more comfortable.
The required frequency is the DVB-C or DVB-T middle frequency of the channel. Additionally, the bandwidth of the
desired channel has to be at the drop down menu.
After the successful insertion of frequency and bandwidth, the signal modulation of the received channel is shown in
green color. If there is no signal detected, a red question mark appears.
Save the settings with the "Apply" button.
32