System Settings - Wisi OM 11 0648 Betriebsanleitung

10.1 System settings:

All pre-adjusted IP parameters and general information are visible in the system menu.
Important: If there are several OM 11s in use, the DHCP server has to be disabled, otherwise there will be a collision
of the IP addresses, as all devices automatically have the IP address 192.168.000.20
Output Type:
Remux Mode:
Reboot System:
Factory Reset:
Open Log File:
Clear Log File:
Set Password:
Bluetooth:
Apply:
30
Selection of output modulation:
Remux-Mode setting:
Reboot of the headend system.
Restore the factory settings (all parameters will be reset).
Display the "Log File" with all events.
Clear the "Log File" history.
Administration of all users and passwords .
(Only available at "admin" user)
User:
4- 16 characters (A...Z; a...z; 0...9)
Password:
4- 48 characters (A...Z; a...z; 0...9; ! " # $ % ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { } ~ )
Operation mode "normal": Bluetooth activation by button (Page 27). Without an active
connection, Bluetooth will be deactivated after 3 minutes. Operation mode "hold":
Bluetooth is permanently activated.
All settings will be saved.
DVB-C <-> DVB-T
Normal Mode <-> Hotel Mode