Remux Network Settings - Wisi OM 11 0648 Betriebsanleitung

5. Insert Service Name: Insert the name of the video file and service. The name is shown at the TV scan or
changeover at the TV set.
6. Start: The video conversion will be started. The source file gets converted into a transport stream file (TS-file) with
the selected parameters. After the successful conversion "process done" is written below the Start button.
7. Play: Start and test the successful converted video.
8. Upload: In the Windows folder of the source file an xxxx.omts file is now available. This file has to be uploaded to
the OM11 according to the following steps:
1. Select the converted xxx.omts file from your windows folder by Select file.
2. The file will be uploaded into the file browser by clicking the Upload button.
3. In the left overview area all videos of the file browser are visible.
4. Select the required video file and start the video with Start Playout. The video will be loaded into the internal
memory of the headend. During this procedure, the video starts from the beginning. As soon as the video is
completely loaded in the memory, it runs regularly from beginning to end.
5. Stop Playout stops the video.
Download: Download the selected video file of the file browser to the connected computer, for example to rename
the file.
Delete: Delete the selected video of the file browser
35