Beper P102FRU200 Bedienungsanleitung Seite 9

EN
4in1 Hand Blender Set Use Instructions
How to use the hand blender
After assembly the hand blender and check it is correctly assembled, connect the power cord to the socket.
To turn on the product, press the button of the desired speed.
The stainless steel blade allows to chop the ingredients into the container.
To get better results, it is necessary to give to the hand blender a rotating movement into the container. For a
correct functioning of the blades it is necessary to have a liquid part. At the same time it is necessary to keep the
blade completely immerse into the ingredients to avoid splash.
If during blending, the normal rotation of the blade is blocked or obstructed by food, turn off the blender and
unplug the power cord from the electrical outlet. Free the blades from the food and resume processing.
Foods can be processed directly in the measuring cup, taking care not to fill it over the 700ml limit.
Assembly and operation of the stainless steel whisk
Insert the whisk attachment into the main unit, screw the parts together. Then insert the stainless steel whisk.
To disassemble the attachment, unscrew the assembly mechanism and separate the two components.
After checking the correct assembly of the steel whisk, insert the power cable into the electrical socket and pro-
ceed with switching on the product.
The stainless steel whisk allows you to mix, beat and whip.
After use, disconnect the power cord from the electrical outlet, remove the whisk and the attachment.
Assembly and operation of the chopper
Place the container on a stable and horizontal surface.
Insert the stainless steel blades and put the food to be processed in the container.
Place the lid over the container and lock it.
Checked the correct assembly of the chopper, insert the power cable into the electric socket and operate the
product.
The chopper is ideal for mincing, crumbling and shredding a wide variety of foods: meat, bread, fruit, cheese
and vegetables.
To obtain well-chopped, creamy and fine food, distribute the food evenly inside the container.
Insert 10-20 mm thick pieces of meat into the container, without bones or muscles.
Do not chop hard foods such as frozen foods, ice, grains, spices and coffee.
After use, disconnect the power cord from the electrical outlet, unlock the motor body from the cover. Remove
the lid from the container.
Remove the blade by taking it from the upper end, being careful not to cut yourself. Remove the food from the
container.
Cleaning
Before cleaning the hand blender, unplug the cord supply from the socket.
The motor unit can be cleaned with a soft cloth and hot water.
Do never use thinners, abrasive detergent in general, detergent for plastic, glass or other, that could damage
the hand blender.
Do not put liquids into the hand blender.
Do not immerse the main unit into water or other liquids, do not rinse with water.
Clean the blending attachment with running water.
Be careful to the stainless blade that is very sharpen and cutting.
Technical data
Power: 300-400W
Power supply : 220-240V ~ 50-60Hz
For any improvement reasons, Inside reserves the right to modify or improve the product without any
notice.
9